| 拉伸强度 | 苏州 |
|---|---|
| 密度 | 1 |
| 缺口冲击强度 | 2 |
| 燃烧性 | 3 |
| 热变形温度 | 4 |
| 弯曲弹性模量 | 5 |
| 交货地点 | 4 |
| 悬臂梁冲击强度 | 5 |
| 牌号 | A216 |
| 产地/厂家 | 法国罗地亚 |
| 产品名称 | 法国罗地亚PA6 |
| 用途级别 | 通用级 |
| 吸水性(23℃,50RH) | 2 |
| 品牌 | 法国罗地亚 |
| 型号 | A216 |
PA6 | A216 | TECHNYL?法国罗地亚 | 15850267116 | 本色 | 未增强级 含成核剂 润滑 增韧
|
ytel? 80G33L NC010
33% Glass fiber reinforced polyamide 66 resin with outstanding impact resistance developed using DuPont? Super Tough technology 33 ％玻璃纤维增强的聚酰胺66树脂出色的抗冲击性开发利用杜邦?超级强韧技术
Zytel? 80G43HS1L BK104
43% Glass fiber reinforced, heat stabilized, black polyamide 66 resin with superior impact resistance43 ％玻璃纤维增强，热稳定，黑色尼龙66树脂具有优异的抗冲击性
Zytel? 84G33 BKB031
33% Glass reinforced toughened black cube blended nylon 66 and nylon 6 comelt resin 33 ％玻璃纤维增强增韧黑色立方体混纺尼龙66和尼龙6 comelt树脂
Zytel? BM73G15THS BK317
15% Glass fiber reinforced, heat stabilized, lubricated, toughened polyamide 6 for blow molding 15 ％玻璃纤维增强，热稳定，润滑，增韧尼龙6的吹塑
Zytel? CFE8005HS BK010
Blow moldable, Super Tough nylon 66 resin吹塑成形，超级强韧尼龙66树脂
Zytel? DMXST601H NC010
Super Tough nylon 66 resin with improved stiffness and excellent dimensional stability 超级强韧尼龙66树脂，改善刚度和良好的尺寸稳定性
Zytel? FE240012 BK010
Highly toughened, heat stabilized polyamide 612 for extrusion, blow molding or processing by other techniques requiring high melt viscosity. 高度增韧，热稳定聚酰胺612挤压，吹塑或处理的其他技术要求高熔体粘度。
Zytel? FE4200 BK136
Toughened, heat stabilized Nylon 66 resin for extrusion增韧，热稳定的尼龙66树脂的挤出
Zytel? FN714 NC010
Very flexible, grafted ionomer modified nylon 66 resin非常灵活，接枝离子改性尼龙66树脂
Zytel? FN718 NC010
Flexible, grafted ionomer modified nylon 66 resin灵活，接枝离子改性尼龙66树脂
Zytel? FN727 NC010
Graft ionomer modfied nylon 6 resin. Flexible, nonplasticized. 接枝离子modfied尼龙6树脂。灵活， nonplasticized 。
Zytel? MT409AHS BK010
Medium Toughened, high performance, heat stabilized, black polyamide 66 resin having good stiffness and improved knit line strength with superior toughness and processability中等增韧，高性能，热稳定，黑色尼龙66树脂具有良好的刚度和强度提高针织线的卓越的韧性和可加工
Zytel? MT409AHS NC010
Medium Toughened, high performance, heat stabilized polyamide 66 resin having good stiffness, improved knit line strength, surface appearance with outstanding processability中等增韧，高性能，热稳定，尼龙66树脂具有良好的刚度和强度提高针织线的卓越的韧性和可加工
Zytel? ST7301 BK356
Super Tough, heat stabilized, lubricated, black polyamide 6 resin for injection molding and extrusion. It offers outstanding impact resistance over a wide temperature and humidity range and high productivity超级强韧，热稳定，润滑，黑色尼龙6树脂注塑成型和挤出。它提供了出色的抗冲击性在宽的温度和湿度范围和高生产力
Zytel? ST7301 NC010
Super Tough, heat stabilized, lubricated polyamide 6 resin for injection molding and extrusion. It offers outstanding impact resistance over a wide temperature and humidity range and high productivity超级强韧，热稳定，润滑尼龙6树脂注塑成型和挤出。它提供了出色的抗冲击性在宽的温度和湿度范围和高生产力
Zytel? ST800HSL BK152
Heat stablized Super Tough black polyamide 66 resin. It offers outstanding impact resistance, high productivity and laser markability热稳定超级强韧黑色聚酰胺66树脂。它提供了出色的抗冲击性，高生产力和激光markability
Zytel? ST801A NC010A
Super Tough, high performance, polyamide 66 resin. It is partially UV stabilized and when appropriately colored offers limited protection to indirect sunlight exposure. 超级强韧，高性能，聚酰胺66树脂。这是部分紫外线稳定和适当的颜色时，提供有限的保护，以间接的阳光照射。
Zytel? ST801AHS BK010
Super Tough, high performance, black polyamide 66 resin. It offers outstanding molding performance in injection molding applications. 超级强韧，高性能，黑色聚酰胺66树脂。它提供了出色的成型性能的注射成型应用。
Zytel? ST801AHS NC010
Super Tough, high performance polyamide 66 resin. It offers outstanding molding performance in injection molding applications. 超级强韧，高性能的聚酰胺66树脂。它提供了出色的成型性能的注射成型应用。
Zytel? ST801AW BK195
Super Tough, weatherable, easy flow and processing friendly, black polyamide 66 resin for injection molding. It offers the best resistance to outdoor exposure. 超级强韧， weatherable ，易于流动和加工友好，黑色聚酰胺66树脂注塑。它提供了**好的抗户外暴露
Zytel? ST801AW NC010
Super Tough, high performance polyamide 66 resin. It is UV stabilized and when appropriately colored, offers the best resistance to indirect sunlight in automotive interior applications超级强韧，高性能的聚酰胺66树脂。它是紫外线稳定和适当的颜色时，提供了**好的抗间接阳光在汽车内饰的应用
苏州润之来塑化有限公司
手机:15850267116
Q Q:1738287316
传真:0512-53128921
邮箱:pa668888@163.com
邮编:215400
部门: 销售一部
职位: 经理
联系人: 邓生
地址：苏州市太仓市浮桥镇华东国际塑化城
6-4-6