供应Lanco PE1525蜡粉

Surface Modifiers
Lanco™ PE 1525 MF
Product Type FDA Compliant, Micronized Polyethylene Wax Designed
Especially for Powder Coating Applications
Performance Lanco PE 1525 MF is a specially developed wax designed to
improve the surface properties of powder coatings. It provides
excellent scratc**brasion resistance and can be easily
predispersed due to its optimum particle size. In addition, it
provides a matting effect, allowing the addition rate of matting
hardeners to be reduced.
The use of Lanco PE 1525 MF provides the following benefits:
• Increased scratc**brasion resistance
• Improved slip and antiblocking
• Non-yellowing
• Improved surface smoothness
• Acts as a processing aid during powder production
• Also useful in a wide variety of systems where a larger particle
size polyethylene is desirable
• Complies with FDA Regulation 21 CFR 175.300
Typical Applications Lanco PE 1525 MF is useful in a wide range of powder coating
resin systems based on:
• Epoxy
• Hybrid
• Polyester urethane
• Acrylic
Incorporation Lanco PE 1525 MF should be incorporated into the premix, prior
to the extrusion step.
Addition Levels The recommended addition level of Lanco PE 1525 MF is 0.3-1%,
based on total formulation weight. Higher addition rates may be
needed to produce the desired matting effect.
Fluid technologies for a better world™
Revised August 2000
The Lubrizol Corporation
29400 Lakeland Boulevard
Wickliffe, Ohio 44092-2298
Telephone: 440/943-4200
Fax: 440/347-6590
www.lubrizol.com
www.lzcoatingadditives.com
Lubrizol Deutschland GmbH
Max-Planck-Strasse 6
D-27721 Ritterhude, Germany
Telephone: +49 421 69 33-3
Fax: +49 421 69 33-400
Lubrizol Southeast Asia (PTE) Ltd.
44 Tanjong Pen**
Singapore 609032 Singapore
Telephone: +65 6264-1644
Fax: +65 6264-2105
Lubrizol do Brasil Aditivos Ltda.
Av. Tamboré 1393
Centro Empresarial Tamboré
Tamboré, SP, Brasil
CEP 06460-000
Telephone: +55-11-4688-1168
Fax: +55-11-4688-1859
Notice to Buyer: Exclusion of Warranties and Limitation of Liability.
All information supplied by The Lubrizol Corporation is considered accurate, but is furnished upon the express condition that the
person receiving it shall make their own tests to determine its suitability for its particular purpose. No warranty is expressed or
implied regarding such information, the data upon which the same is based, or the results to be obtained from the use thereof, that
any product shall be merc**ble or fit for any purpose, or that the use of such information or product will not infringe any patent.
Under no circumstances shall The Lubrizol Corporation be liable for incidental or consequential damages resulting from the use of
handling of its products, and, in any event, liability for breach of any warranty or contract with respect to such products is limited to
the net selling price of the product or the replacement thereof at the option of The Lubrizol Corporation.
Appearance Fine White Powder
Chemical Type Polyethylene Wax
Particle Size*, Median (Dv50-μ)
* Determined by Laser Diffraction
≤ 15
Density g/cc @ 20°C (68°F) 0.96
Wax Melting Point °C (°F) 105 (221)
Acid Value (mg KOH/g) ≤ 1
Typical Properties
Packaging and Storage Lanco PE 1525 MF is packaged in 20 kg (44 lb) bags, 15 bags per
pallet.
Material should be stored on pallets in closed areas. A storage
temperature of 30°C should not be exceeded.
Regulatory Status Lanco PE 1525 MF complies with FDA regulation 21 CFR
175.300.
All components comply with the chemical control laws and
notification requirements of the United States (TSCA), Canada
(DSL), European Union (EINECS/ELINCS) and Japan (ENCS).
Complete, up-to-date worldwide regulatory information is available
on the Material Safety Data Sheet.